Another tip that may fix an unresponsive Digital Crown is unpairing your Apple Watch from your iPhone and then re-pairing again. To do this, make sure your iPhone and Apple Watch are close together. On your iPhone, open the Apple Watch app. Tap My Watch in the bottom left corner.
The black ring on the Digital Crown means that your Watch is a GPS-only model, whereas the red ring means that the Watch also has mobile/cellular capability. You must have the GPS-only version.
According to Apple, if the digital crown gets stuck or won't move, it could have dust or debris underneath, fixable by running the Apple Watch under fresh water from a faucet for 10 to 15 seconds. If the Digital Crown gets stuck or won't move, it might be because of dirt or debris.
They're incredibly durable for a computer, and quite durable for a watch.
Not just for winding, the crown is an all-encompassing mechanism of functionality in a watch: The crown is used to wind a watch's mainspring, which provides the 'energy' and power to the watch's internal movement. The crown is used to set the time of the watch.
What if Apple Watch won't Unlock Even after Turning the Digital Crown? In some cases, your Apple Watch might fail to unlock even after you've turned the crown. This might be due to dirt or debris stuck between the crown and the housing or something else entirely.
If you wear your Apple Watch on your right wrist, the digital crown probably already faces your forearm. But if you wear it on your left wrist, the digital crown probably points toward your hand. That's the orientation Apple uses to show off its smartwatch, at least.
Press or rotate the Digital Crown Turn to zoom, scroll, or adjust what's on the screen. On Apple Watch Series 2 or later and Apple Watch SE,* turn to unlock the screen during a swimming workout.
Apparently, very durable. I've never read a post where someone complained of a digital crown failure. I've had two Watches, it's never been a problem or concern. For those who love mechanical watches, this is something to love - it has gears and bearings; in spirit very much like a traditional watch.
The Digital Crown is designed to withstand normal usage. Should it fail within one year under normal use, it will be covered under the Apple One Year Limited Warranty.
A new patent from Apple reveals that the Apple Watch's Digital Crown may soon be replaced with an optical sensor. As reported by Patently Apple, the possible optical sensor will use gestures as a way to control the Apple Watch, thus replacing the current Digital Crown.
Other than touch-based screen gestures like tapping and swiping, the Digital Crown and Side buttons are the Apple Watch's only control mechanisms. You can use the Digital Crown to scroll through lists and zoom into pictures and maps, plus it can be used to control slider bars like volume and font size.
This is related to the sleeping mode. The sleeping mode "locks" the watch and turns the brightness down a lot so that the watch does not disturb you during your sleep. You can change your sleep shedule right on the watch.
3. Crown. The "little knob on the side of the watch" used to set time. May also serve additional functions depending on the watch. Example: Used to wind the mainspring on mechanical watches.
Unpair Apple Watch from Your iPhone Another tip that may fix an unresponsive Digital Crown is unpairing your Apple Watch from your iPhone and then re-pairing again. To do this, make sure your iPhone and Apple Watch are close together. On your iPhone, open the Apple Watch app.
Apple Watch Series 4 and later provides haptic feedback for the Digital Crown, which gives people a more tactile experience as they scroll through content. By default, the system provides linear haptic detents — or taps — as people rotate the Digital Crown a specific distance.